Click image to view full size image
1. Application
SJ-65/30 Single Screw Extruder belongs to single-screw mixing extruder and it is the main machine for plastic extruding. It is used with relevant auxiliary machine (including shaping machine head) and screw, so that can satisfy the needs of different material extruding. It can extrude thermoplastics, such as hard and soft polypropylenePVCpolyester, for example, pipe, stick, film, thread, cable insulation, hollow article etc.
2. Main Technical Parameters
1) Screw Diameter:65mm
2) L/D of screw: 301
3) Highest Rotating Speed: 101r/min
4) Capacity (PET): about 100kg/h
5) 3-phases Asynchronous Motor
Motor Model: Y200L-4
Power: 30kw
Rotating Speed: 1470r/min
Pressure: 440V
6) Frequency-converter Model: ACS550-01-059A-4
7) Heating
Heating way: cast aluminum heater
Total Heating Power: 15kw
8) Cooling Medium: running water
Head tank cooling: cooled by water in one area
Machine barrel cooling: cooled by fan in five areas
9) Fan Specification
DF-3 low-noise centrifugal blower: 180W 440V 5fans
Input air: 6.75m3/h
Total pressure: 48mm H2O
Total power: 0.90kw
10) Central height of the machine: 1046mm
11) Outline dimension of the machine: 3000×1050×1550
12) Total Weight: about 1000kg
PVC Pipe Extruder
